40t One Column Swaging Machine PLUS &
40t One Column Swaging Machine – Desktop-Design
This down-stroke swager sets itself apart thanks to its very good accessibility and the piston located on top. This means that the work piece remains in position during swaging and is particularly simple to finish. Our 40t desktop swager is particularly suitable for use as a bench top press for smaller components and stands out thanks to its high reliability and simple operation. The 40t PLUS-Version has a very low noise and is particularly suitable for serial swaging of smaller components and stands out thanks to its high speed, low noise and ergonomic work position.
Most important characteristics:
- very good accessibility + down stroke swager
- reliable + safe
- easy to use + ergonomic
- low noise + fast
- short presstime
- automatic mode for the PLUS-Version
Suitable for the following ferrules:
- Aluminium ferrules up to ZEN® 8
Our hydraulic press in use
This video demonstrates working with our 415 kN One Column Swaging Machine PLUS. It illustrates the fundamental principle of swaging using an aluminium ferrule. The integrated automatic function is very helpful if you have to process large batches: without taking your foot off the foot pedal, the machine closes and opens again as soon as the set pressure has been reached. You can preset the return stroke in the process. This saves time and is ergonomic.
Images of the One Column Swagers
Show technical data
|415kN PLUS Press||415 kN Desktop-Press|
|Max. pressure capacity||415||415||kN|
|Max. piston stroke||35||26||mm|
|Max. oil pressure||400||400||bar|
|Unloaded stroke speed (up to 280 kN)||10||-||mm/s|
|Loaded stroke speed||8,3||5,7||mm/s|
|Swaging die take up (W x H)||50 x 48||50 x 48||mm|
|Power supply||4 kW / 400 V / 50 Hz||2,2 kW / 400 V / 50 Hz|
|Stroke limit||smooth, electronic control||-|
|Dimensions (L x W x H)||1135 x 810 x 1400||590 x 400 x 556||mm|
|Weight with oil||385||185||kg|
We use only high quality components from leading manufacturers or components specially manufactured to our standards, ensuring that your machine is ready for use at all times. We guarantee the supply of spare parts for 30 years.
Easy to use and ergonomic
It is particularly easy to operate since the ferrule is pressed from the top and the work piece does not move vertically with the piston. The controls are located at the right spot and you can operate them intuitively. Documentation and signage are provided in the local language.
Our swagers comply with the current valid EU Machinery Directive 2006/42/EC and are manufactured according to ISO9001.
High speed / performance
Our swagers stand apart thanks to their high engine performance and thus high press speeds. At low pressure, press speed is the maximum permissible 10 mm/s.