lrqa-leea-awrf-certification

ferrule-steal-type-st

Steel Ferrule Type ST

Our Steel Ferrule Type ST continues our Steel Ferrule Type Z range; but with a reduced wall thickness.

Special characteristics :

  • Suitable for fishing nets
  • Manufactured from seamless tubes
  • Available in the sizes ST28 - ST68
  • For rope wire with a diameter of 14 - 40 mm
  • Finished with our cylindrical press dies without cutting edges

Technical data

Splicing Chart for our Steel Ferrule Type ST ferrules

Remark: Press loads are for guidance only.
Follow correct press procedure and set working pressure until Die faces just meet.
NO MORE - NO LESS.

Steel TURN-BACK ferrules are not recommended for use on 6 x 24 (7 hemp) construction steel wire ropes or ropes with fill factor less than 0.45<

Turn-back
ferrule
Code No.
Actual rope
diam. mm
fill factor 0.45 - 0.6
Turn-back
swage
Code No.
Maximum
pressed
diam. mm
Press load
tonne.
(Indicative only)
17 15,5
16,5 
26,5
17,8 
16
17 
29,1
30,4 
150
19  17,7
18,6 
18,7
19,8 
18
19 
32,8
34,4 
180 
21 19,5
20,4 
20,5
21,8 
20
21 
35
36 
220 
23 21,9
22,5 
22,8
23,8 
22
23 
38,4
40 
270 
25 23,9
24,9 
24,8
25,8 
24
25 
42,5
43,5 
310 
27 25,9
26,9 
26,8
27,8 
26
27 
46
47 
350 
29 27,9
28,9 
28,8
29,8 
28
29 
49,5
50,5 
370 
31 30,0
31,0 
30,8
31,8 
30
31 
53,6
54,6 
450 
33 32,0
33,0 
32,8
33,8 
32
33 
55,8
56,6 
500 
35 34,0
35,0 
34,8
35,8 
34
35 
59,1
60,1 
750 
37 36,0
37,0 
36,8
37,8 
36
37 
   
39 28,0
39,0 
38,8
39,8 
38
39 
65,6
66,6 
960 

Press loads are for guidance only.
Follow correct press procedure and set working pressure until Die faces just meet. NO MORE - NO LESS.
Steel TURN-BACK ferrules are not recommended for use on 6 x 24 (7 hemp) construction steel wire ropes or ropes with fill factor less than 0.45

Technical amendments reserved.