lrqa-leea-awrf-certification

ferrule-steal-type-flemisheye

Flemish Eye Steel Ferrule

Steel ferrules for manufacturing Flemish Eye rope slings .

Special characteristics:

  • Suitable for use in high temperatures (e.g. blast furnaces)
  • Widely used for offshore applications
  • Available in the sizes 1/4" - 5"
  • Finished with our special Flemish Eye press dies

Technical data

Splicing Chart for our Flemish Eye ferrules

pressklemme-sleeve-flemisheye skizze

1 = Rope-Ø mm

2 = Ferrule-Dimensions mm

Remark: Dies 1/4" through to 1" have one tapered and one plain bore.
Sleeves 1.1/8" and above require 1st. and 2nd. stage dies.
2nd. stage dies for 1.1/8" through to 1.3/4" are tapering dies.
Both 1st. and 2nd. stage dies for sleeves 2" upwards are plain bore with no taper.
For accommodation of steel wire ropes with higher tensile grade than 1960N/mm² refer to our technical department.

Rope-Ø mmFerrule-Dimensions mmFerrule Ø in mm
after swaging
mm *1 inch *1 A *2 B *2 G *2 D *2 E *2 Ferrule Ø in mm after swaging
9, 10 3/8 38 23,0 16,7 11,9 9,9 19,05
11 7/16 51 31,0 21,4 14,3 16,5 25,65
12, 13 1/2 51 31,0 23,0 15,9 14,2 25,65
14 9/16 70 37,3 26,2 17,8 16,0 31,50
16 5/8 70 37,3 27,8 19,1 16,0 31,50
19 3/4 81 43,7 32,5 23,1 21,3 37,08
22 7/8 90 51,6 38,9 26,0 25,4 42,67
25, 26 1 102 58,0 43,7 30 29 49,02
               
28 1 1/8 122 63,5 49,2 33 32 54,10
32 1 1/4 132 70,6 54,8 37 36 58,93
35 1 3/8 148 76,2 60,3 40 40 64,01
38 1 1/2 159 82,6 66,7 44 43 68,83
44 1 3/4 184 97,6 79,4 50 50 78,74
               
50, 52 2 216 111 92,1 58 57 90,42
56 2 1/4 243 128 102,4 64 65 104,65
62, 64 2 1/2 267 140 114,3 70 72 114,30
70, 71 2 3/4 292 146 120 76 79 119,38
76, 77 3 305 152 127 83 86 125,98
87-90 3 1/2 356 178 148 99 100 146,56
93-96 3 3/4 381 191 160 103 108 158,24
100-105 4 406 206 173 111 114 169,93
112-115 4 1/2 457 232 195 124 129 189,23
126-128 5 508 267 222 140 143 222,25

Dies 1/4" through to 1" have one tapered and one plain bore.

Sleeves 1.1/8" and above require 1st. and 2nd. stage dies.

2nd. stage dies for 1.1/8" through to 1.3/4" are tapering dies.

Both 1st. and 2nd. stage dies for sleeves 2" upwards are plain bore with no taper.

For accommodation of steel wire ropes with higher tensile grade than 1960N/mm² refer to our technical department.

We reserve the right to amend technical data.