lrqa-leea-awrf-certification

ferrule-aluminium-type-xl

Ferrule - XL

Aluminium ferrules for large wire ropes with a diameter above the splicing table of BS EN 13411-3

Special characteristics:

  • Manufactured from seamless tube
  • Available in the sizes XL 52 – XL 90 and Z 94 + Z 102
  • For wire rope with a diameter of 46 - 102 mm
  • Swaged with our cylindrical swaging dies with cutting edges

Ferrule section XL & Z

Technical data:

Splicing chart for our Steel Ferrule Type XL ferrules

1770 N/mm2 Grade Round strand rope Ø measured in mm

1 = Fibre core - metallic area C min 0.283

2 = Steel core - metallic area C up to 0.487

Remark: For accommodation of steel wire ropes with higher tensile grade than 1770 N/mm2 metallic area refer to our technical department.

Ferrule No.1770 N/mm2 Grade Round strand rope Ø measured in mmFerrule Ø in mm
after swaging
  Fibre core -
metallic area C min 0.283
Steel core -
metallic area C up to 0.487
 
Ferrule No. C ≥ 0,283 *1
min./max.
C ≤ 0,487 *2
min./max.
mmFerrule Ø in mm after swaging
XL 52 50,7 55,0 46,3 50,7 100
XL 54 55,1 59,4 50,8 54,4 108
XL 56 59,5 63,6 54,5 58,2 116
XL 60 63,7 67,6 58,3 61,9 124
XL 64 67,7 71,9 62,0 65,8 132
XL 68 72,0 76,2 65,9 69,7 140
XL 72 76,3 80,5 69,8 73,6 148
XL 76 80,6 84,8 73,7 77,4 156
XL 80 84,9 89,1 77,5 81,3 164
XL 84 89,2 93,4 81,4 85,2 172
XL 88 93,5 97,7 85,3 89,1 180
XL 90 97,8 102,0 89,2 93,1 188

For accommodation of steel wire ropes with higher tensile grade than 1770 N/mm2 metallic area refer to our technical department.

We reserve the right to amend technical data.